Elstat ems75sz Manual page 23

Press and hold the Set button until PAS is displayed.
1.
2. Enter the button sequence of the password.
3. Ensure that PS is displayed.
4. Press and hold the Set button to view the parameter name and value alternately.
5. Keep the Set button pressed to scroll through the parameter settings.
No. Parameter
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Please see:
See "Celsius or Fahrenheit (CF)" on page
67
See "Set point (SPC or SPF)" on page 67
See "Differential (dIF)" on page 67
See "Calibration 1 (CA1)" on page 68
See "Calibration 2 (CA2)" on page 68
See "Saving set point (SSP)" on page 68
See "Saving differential (Sd)" on page 69
See "Freeze-up protection (dtt)" on page
69
See "Fan set point (FSP)" on page 69
See "Condenser high temperature (Ht)"
on page 70
See "Defrost activation temperature
(ddt)" on page 70
See "Defrost termination temperature
(dtd)" on page 71
See "Compressor rest time (rt)" on page
71
See "Delay to saving (dS)" on page 72
See "Learning period (LP)" on page 77
See "Saving restart period (Sr)" on page
72
See "Refrigeration system failure (Ct)" on
page 72
22 of 86
27 February 2014
Notes: