What Are The Menus - Elstat ems75sz Manual

Display
4.5

What are the menus?

The table below describes the EMS controller menus.
Use the Down button to scroll through the menu and the Set button to select.
Menu Display
Parameter list
Test routine
Faults
Half reset
State Description
duration (
pressor.
EMS controllers disable the compressor to prevent over
cooling and run the evaporator fan, if applicable, according to the
Alarm:
evaporator fan cycle.
Freeze-up
Problems may occur if the ambient temperature falls below 0°C
(32°F) or if the appliance sensor fails. See "How to troubleshoot
protection
problems with freeze-up protection (888)" on page 60
Alarm:
Refrigeration
See "How to troubleshoot refrigeration system failure (rSF)
system alarms" on page 62
failure
Alarm:
Appliance
sensor failure
Alarm:
See "How to troubleshoot temperature sensor alarms" on page
Condenser 63
sensor failure
Alarm:
Evaporator
sensor failure
Description
Displays the parameters and the parameter values.
Enters the test routine that tests the relays, temperature sensors,
door switch, and motion sensor.
Displays the last three faults (alarms).
See "How to view the last three alarms (FLt)" on page 27
Clears the self-learning matrix.
20 of 86
27 February 2014
b1
) parameter, the EMS controller switches off the com-