Understanding The Error Messages - Brother DCP 8085DN User Manual

Printing data from a USB Flash memory drive or a digital camera supporting mass storage
Note
• If you want to change the default setting
for the paper tray to feed paper from,
press Menu, 1, 4, 2 to change the paper
tray setting.
• You can change the default settings for
Direct Print by using the control panel
when the machine is not in the Direct Print
mode. Press Menu, 4 to enter the
USB Direct I/F menu. (See Menu
table on page 106.)
Understanding the
error messages
Once you are familiar with the types of errors
that can occur while you print data from the
USB Flash memory drive with Direct Print,
you can easily identify and troubleshoot any
problems.
Out of Memory
This message will appear if you are
working with images that are too large for
the machine's memory.
Unusable Device
This message will appear if you connect
an incompatible or broken device to the
USB direct interface. To clear the error,
unplug the device from the USB direct
interface.
(See Error and maintenance messages
on page 76 for the detailed solution.)
6
6
45