Billings And Id Copies; Making N In 1 Copies - Brother DCP 8085DN User Manual

Chapter 5

Billings and ID Copies

When you want to copy Billings paper or
Identification card, you can make it more
visible by using this feature. This feature can
copy one page at a time. After the copying is
finished, the copy settings will return to the
settings that you set just before that.
a
Place the Billings paper or Identification
card face down on the scanner glass.
Even if a document is set on the
ADF, the machine scans the data
from the scanner glass.
b
Press N in 1.
c
Press a or b to choose 2 in 1 (ID).
Press OK.
d
Press Start.
e
After your machine finish scanning, the
LCD shows the below:
Turn over the ID
Then Press Start
Turn over the Billings paper or
Identification card on the scanner glass.
Press Start.
Note
The copy settings for this feature are set
automatically and the temporary settings you
have set will be cancelled.
If you want to copy another page, you need to
press N in 1 again.
36

Making N in 1 copies

5
(page layout)
You can reduce the amount of paper used
when copying by using the N in 1 copy
feature. This allows you to copy two or four
pages onto one page, which lets you save
paper.
IMPORTANT
• Please make sure the paper size is set to
Letter, A4, Legal or Folio.
• (P) means Portrait and (L) means
Landscape.
• You cannot use the Enlarge/Reduce
setting with the N in 1 feature.
a
Load your document.
b
Use the dial pad to enter the number of
copies (up to 99).
c
Press N in 1.
d
Press a or b to choose 2 in 1 (P),
2 in 1 (L), 4 in 1 (P),
4 in 1 (L) or Off(1 in 1).
Press OK.
e
Press Start to scan the page.
If you placed the document in the ADF,
the machine scans the pages and starts
printing.
If you are using the scanner glass, go
to step f.
f
After the machine scans the page,
press 1 to scan the next page.
Flatbed Copy:
Next Page?
a 1.Yes
b 2.No
Select ab or OK
g
Put the next page on the scanner glass.
Press OK.
Repeat steps f and g for each page of
the layout.
5