Enter Personal Information (Station Id) - Brother MFC-J2310 Start Here Manual

12
Enter personal
information (Station ID)
You should store your name and fax number to be
printed on all fax pages that you send.
Information on how to enter text uuBasic User's
Guide: Entering Text
a
Press Settings.
b
Press s or t to display Initial Setup.
Press Initial Setup.
c
Press s or t to display Station ID.
Press Station ID.
d
Enter your fax number (up to 20 digits) on the
Touchscreen, and then press OK.
e
Enter your name (up to 20 characters) using
the Touchscreen, and then press OK.
NOTE
• Press to cycle between letters, numbers
and special characters. (The characters
available may differ depending on your
country.)
• If you need to enter a character that is on the
same button as the character before, press c to
move the cursor to the right.
• If you entered a character incorrectly and want
to change it, press
the correct character.
f
Press .
NOTE
If you make a mistake and want to start again,
and go back to a.
press
to delete it and re-enter
13
Fax Transmission Report
Your Brother machine is equipped with a
Transmission Verification Report that can be used as
confirmation that you sent a fax. This report lists the
name or fax number of the receiving party, the date,
time, and duration of the transmission, the number of
pages transmitted, and whether or not the
transmission was successful.
Instructions on using this feature uuBasic User's
Guide: Transmission Verification Report
14 Set Tone or Pulse dialling
mode (Not available in
New Zealand)
Your machine comes set for Tone dialling service. If
you have a Pulse dialling service (rotary), you need to
change the dialling mode.
a
Press Settings.
b
Press s or t to display Initial Setup.
Press Initial Setup.
c
Press s or t to display Tone/Pulse.
Press Tone/Pulse.
d
Press Pulse (or Tone).
e
Press .
11