Table Of Contents - r.LiNK RL2-NBT Manual

Contents
1. Prior to installation
1.1. Delivery contents
1.2. Checking the compatibility of vehicle and accessories
1.3. Boxes and connectors
1.3.1. Video-interface
1.3.2. CAN-bus box
1.4. Dip-switch settings
1.4.1. Enabling the interface's video inputs (dip 2-3)
1.4.2. Rear-view camera setting (dip 5)
1.4.3. PDC settings (dip 7)
1.4.4. Monitor selection (dip 8)
1.5. Dip-switch settings of CAN-Box
2. Installation
2.1. Place of installation
2.2. Connection schema
2.3. Connecting video-interface and CAN-box
2.4. Connection to the factory monitor
2.5. Connection to the head-unit
2.6. Connecting peripheral devices
2.6.1. Switching of picture formats
2.6.2. After-market rear-view camera
2.6.2.1. Video signal connection of rear-view camera
2.6.2.2. Case 1: CAN-box detects reverse gear
2.6.2.3. Case 2: CAN-box does not detect reverse gear
2.6.2.4. Activation PIP
2.6.3. After-market front camera
2.6.4. After-market video-source
2.6.5. Audio-insertion
2.7. Connecting video-interface and keypad
2.8. Picture settings and guide lines
3. Interface operation
3.1. By iDrive-buttons
3.2. By keypad
4. Specifications
5. Frequently asked questions
6. Technical support
Version 26.04.2021 HW CAM(V31)/(V71) RL2-NBT