Vitotronic 300, GW5B Operating
Selecting a Heating Circuit
Setting the Room Temperature
(continued)
Note: If you return to the standard menu with, the
Setting the room temperature for standard heating mode
Factory setting: 68° F (20° C)
For the heating circuit displayed in the header
Proceed as described (see page 7).
For the other heating circuits
Extended menu
1.
2. "Heating"
3. Select the heating circuit, if necessary (see page 12).
4. "Set room temperature"
5. Set the required value.
Setting the room temperature for reduced heating mode
(night setback)
Factory setting: 37.5° F (3° C)
Extended menu
1.
2. "Heating"
3. Select the heating circuit, if necessary (see page 12).
4. "Set reduced room temperature"
5. Set the required value.
The rooms are heated to this temperature:
H Between the time phases for standard heating mode
(see page 14).
H In the holiday program (see page 19).
header will again display "HC1" (see page 7).
For changes to the heating circuit display in
the standard menu, see page 24.
Central Heating
13