Select Energy Saving Function "Holiday Program - Viessmann VITOTRONIC 300 Operating Instructions Manual

Vitotronic 300, GW5B Operating
Selecting Energy Saving Function "Holiday Program"
Comfort and Energy Saving Functions
To save energy, for example over long holidays, you can
activate the "Holiday program".
Note: The control unit is set up so that the holiday
program applies to all heating circuits. If you
want to make changes, contact your local heating
contractor.
The holiday program has the following effect on the
heating circuits and DHW heating:
H Central heating:
- For heating circuits in the heating program "Heating
and DHW":
In these heating circuits, the rooms are heated to the
selected reduced room temperature (see page 13).
- For heating circuits in the heating program "Only
DHW":
No central heating in these heating circuits.
If the heating program "Only DHW" is selected for
all heating circuits, frost protection monitoring is only
enabled for the boiler and DHW tank.
H DHW heating:
DHW heating is switched OFF; frost protection for the
DHW tank is active.
The holiday program starts at 00:00 h the day following
your departure and ends at 00:00 h on the day of your
return. This means the selected time program is active
on the days of departure and return (see page 14).
Extended menu:
1.
2. "Heating"
3. "Holiday program" (see display example)
4. Set the required departure and return dates.
(see display example)
Display in the standard menu
The enabled holiday program is not displayed in the
standard menu.
Display in the extended menu
In the extended menu, you can scan the selected holiday
program under "Information" (see chapter "Scanning
information", "Heating circuit ..." group).
Terminating or deleting a holiday program
Extended menu
1.
2. "Heating"
3. "Holiday program"
4. "Delete program"
19