Advertisement
69.
Attach Upper Interior Door Stop
(1/2" x 1/2" x 32") positioning trim against door
jamb and underneath door header flush to
edges on inside as shown above. Attach with
4 - 1 1/2" Finishing Nails.
Window
frame.
71.
To reduce possible water from penetrating into the window cavity,
caulk gap on both sides of window opening prior to installing Window
Insert. Position insert in cavity and screw with 6 - 8 1 1/4" Screws.
On sides, make sure to screw insert into the thick butt of the siding only.
Toll Free 1-888-658-1658
32" door stop.
Caulk
gap.
www.outdoorlivingtoday.com
Page 32
70.
Attach upper and lower Vertical Interior
Door Stops as per Step 69. Position against door
jamb and underneath upper door trim. Attach with
4 - 1 1/2" Finishing Nails per piece. Complete
both sides.
Screw insert into
bottom (thick)
part of siding.
Caulk
gap.
sales@outdoorlivingtoday.com
Lower
interior
door stop.
Door
Jamb.
72.
Once Insert is attached,
caulk the "triangular gap"
between the Insert's outside
flange and the siding. Also put
a bead of caulking horizontally
at top of window where the
flange and siding meet.
This additional caulking will
also will reduce the chances
of moisture entering into your
shed.
Advertisement
