Advertisement
Flush with top
of wall framing.
29.
Align Horizontal Wall Cleats (1 @ 3/4" x 3 1/2" x 70", 1 @ 3/4" x 3 1/2" x 21") flush with top of
Rear Wall framing. To help strengthen the Rear Walls, there is a short and a long wall cleat which
meet off-center from the seam between walls. Attach Cleats with 8 - 1 1/4" Screws.
Advice: Prior to fastening walls and
installing rafters, take time to confirm your
walls are level, square and plumb.
Measure diagonal at top and bottom of
walls corner-to-corner. This should be
approximately 99 1/4". More importantly,
if measurements are not within 1/4", your
walls are not square. Adjusting now will
make it easier to install roof section
Toll Free 1-888-658-1658
.
www.outdoorlivingtoday.com
Page 16
sales@outdoorlivingtoday.com
Advertisement
