Advertisement
35.
With Rafter Section correctly aligned, secure rafters to walls using 90° Metal Brackets. Start with
outside rafters and secure 2 Brackets with 1 1/4" Screws. Screw into Wall Extension Framing at the
front and Wall Panel top framing at the rear. Complete both sides.
36.
With outside rafters properly secured, completely secure remaining interior rafters using
8 - 2 1/2" Screws. Screw into rafters from inside of Extension Wall framing at front of shed and inside
Rear Wall framing at rear of shed, behind Horizontal Wall Cleats.
37.
Carefully flip Roof Panels over so plywood sheathing is facing up.
Center Rafter/Facia Nailing Strips (2) (3/4" x 3/4" x 51") onto outside of
each panel flush with plywood. Attach with 4 - 1 1/4" Screws evenly
spaced. The Rafter/Facia Nailing Strip provides for a greater nailing surface
later when you attach side facia.
Toll Free 1-888-658-1658
Rafter/Facia
Nailing Strip.
www.outdoorlivingtoday.com
Page 20
sales@outdoorlivingtoday.com
90° Metal
Brackets
Advertisement
