66.
Place and align rear and side facia for best possible fit with rear capping side facia. Attach facia
to rafter ends with 6 - 1 1/2" Finishing Nails per piece. Complete both rear facia pieces.
67.
Position first Roof Ridge Board (1/2" x 4 1/2" x 51 5/8") at the front of roof to cap off shingles
and facia. Ridge Boards should meet on seam of roof panels. When aligned correctly, attach with
4 - 1 1/2" Finishing Nails per piece.
68.
Attach Facia / Detail Plates to cover seams where Front and Rear Facia pieces come
together. Secure with 4 - 1 1/2" Finishing Nails per piece.
Toll Free 1-888-658-1658
www.outdoorlivingtoday.com
Page 31
sales@outdoorlivingtoday.com