Features Auxiliary Mounting Pads; Input Shafts - Danfoss 45 J Series Service Manual

Service Manual
Features
Auxiliary Mounting Pads

Input Shafts

Series 45 J Frame Open Circuit Axial Piston Pumps
Auxiliary mounting pads are available for all
radial ported Series 45 pumps. These pads are
typically used for mounting auxiliary hydraulic
pumps.
Since the auxiliary pad operates under case
pressure, an O-ring must be used to seal the
auxiliary pump mounting flange to the pad. The
drive coupling is lubricated by oil from the main
pump case. For details refer to
Axial Piston Open Circuit Pumps Technical
Information, 520L0676.
Series 45 J frame pumps are available with a variety of splined, straight keyed, and tapered end shafts.
For information on shafts refer to
Information, 520L0676.
520L0607 • Rev AI • Sep 2013
Auxiliary pad options
Series 45 J Frame
Series 45 J Frame Axial Piston Open Circuit Pumps Technical
P104 361
11