Safety Instructions; General Description - Eneo CANDID C-05 Operating Instructions Manual

1. Safety Instructions

• Please read these safety and operating instructions before putting the camera into operation.
• Keep the operating instructions in a safe place for later use.
• Do not operate the cameras beyond their specified temperature, humidity or power ratings.
• Pay attention when laying the connection cable and observe that the cable is not subject to heavy loads, kinks, or damaged and no moisture can get in.
Do not attempt to disassemble the camera board from the housing.
• The unit may only be opened by an authorized personnel.
• The warranty becomes void if repairs are undertaken by unauthorized persons.
• Contact the supplier if any functional problems arise.
CAUTION: Do not fully tighten the fixing screws (10) until the camera is adjusted into its exact position. If the camera housing moves on the mounting arm
after the fixing screws have been tightened, the housing may be subject to leaks.
Cleaning:
• Do not use strong or abrasive detergents when cleaning the housing and window (caution: plastic).
• Use a soft and dry cloth when cleaning. In case the dirt is hard to remove, use a mild detergent and wipe gently.
• Keep clean the window.

2. General Description

• 1/3" Day&Night Camera in Weatherproof Housing
• Resolution of 480 Horizontal Lines
• Sensitivity: 0,4Lux at colour / 0,0044Lux at BW (measured at F1,2); (Sens-up ON)
• Lens – CANDID C-05: F1,2 ~ F260 / 4,5 ~ 12,5mm; Vario-DC
– CANDID C-06: F1,3 ~ F240 / 7,5 ~ 50mm; Vario-DC
• High and Low Speed Shutter Control (ESC/DSS)
• Shutter Range: 1/2 to 1/100.000sec.
• Sensitivity Enhancement: up to 32x max.
• Automatic Gain Control up to 28dB (AGC)
• Backlight Compensation (BLC)
• Automatic White Balance (ATW)
• Day/Night, Flickerless Function ON/OFF switchable
• Supply Voltage: 12VDC
• Protection Rating: IP66/67
12