HP TouchSmart IQ810 Series Product End-Of-Life Disassembly Instructions page 9

1
1.To pull apart the iron from the clasp as picture
with hands,take out the iron from Card
reader,confirm the clasp not crack,not out of shape.
Take down the Card reader module from case
4
Disassemble 1pcs screws on C-braket and put them
into parts box.
2
Push IO INSERT to right side and take it off;
Attention: There are 7 hooks all outsert from unit and put it to material box
5
1.Cut 1pcs cable tie with nipper and put it into the waste parts
box
2.Pull HDD power cable from MB connect out vertically. And
route HDD power cable as the yellow in PIC shown.
3