HP TouchSmart IQ810 Series Product End-Of-Life Disassembly Instructions page 18

1
Tear 2 tapeS on antenna,put them in discarding box(as red part).
4
Disassemble 2 screw on camera vertically (as pic).Put
them in screw box .
Note:Don't mix screw.
2
5
hook
Take shielding to material box
3
Route antenna cable fron BASE PAN connector.Tear
2pcs antenna .
1.Check black antenna(left),confirm cable not
broken,no copper outside,connerctor&antenna small
card OK.
2.Put it in material temporary storage.
6
hook
1.Take camera module from unit.
2.Tear camera tinfoil,put it in discarding area.