HP TouchSmart IQ810 Series Product End-Of-Life Disassembly Instructions page 10

1
1.Take HDD cage,then push HDD upside until take out HDD from base pan.
2.Put HDD in parts stocks.
3
Put the tape(in the yellow mark as the Pic) in the material
box.Pull ODD POWER&ODD SATA&ODD EJECT out(as
the red mark) out.
2
4
Take ODD POWER&ODD SATA&ODD
EJECT cable&inverter(thin cable) from tieing
belt.
5
Loose ODD screw with electrical screw driver.
Push ODD out from three hook as the Pic.
Take ODD&ODD SATA&ODD POWER off and put it
in the right position..