HP TouchSmart IQ810 Series Product End-Of-Life Disassembly Instructions page 4

1
Take L/R low rear cover in temporary area.
4
Pull aparts all hooks on plastic of main rear cover.
Attention: 1.Pull apart from down to up.2.Do not break
hooks.3.Do not scratch rear cover.
2
Disassemble 10 screws on rear cover and 1screw on IO insert as picture. Place screws in
material box.
5
use electrical screw driver to disassemble 4 screws on
cable shielding R then put upward off to cable shielding
to materila box.
3
3
6
Attention: Becareful to move out speaker cable don't
scratch it.