HP TouchSmart IQ810 Series Product End-Of-Life Disassembly Instructions page 15

Hide thumbs Also See for TouchSmart IQ810 Series:

Diaassemble AV-INPUT from rear braket metal part,disassemble 2

screws

Take out the wireless net card,the aerial interface not

block,check the surface not scrape,PCB not crack,iron not

out of shape and rust.Electron component nearby screws

hole in scope 1.5 CM radius not fall off,coad is

clear,interface don't have foreign matter and not

damaged,not out of shape,chip set not scrape and

dirty,crack.Gold finger not oxidation,not dirty,not

recede,leak PIN.put in material box.

Route antenna cable fron BASE PAN

connector.Tear 2pcs antenna .

Unlock 1pcs screw on inverter cover shielding

Unlock 2pcs screws on WLAN card.

put in inverter cover shielding screw box.

Pull out inverter cable from AMP card connect vertically..