HP TouchSmart IQ810 Series Product End-Of-Life Disassembly Instructions page 11

1
Take the 7 screws as the above Pic with 2#×10
4
Unload seven screws fixed VGA H/S&VGA.Put screws into
material box.
2
Take out the CPU H/S main power cable from
MB_Fan1 interface.
5
Take out the VGA H/S power cord from MB_Fan2(V)
interface.
Notice:Don't crack the cable.
3
2 pcs screw
bolt
Tear out cable routing tape; Pull LVDS cable
out from MB side.
6
Use electric screwdriver to unload two screws and put it into
material box.
Notice:Don't strike,don't mix the screw.