HP TouchSmart IQ810 Series Product End-Of-Life Disassembly Instructions page 6

1
1.Make sure there are no cable pressed by rear cover;
2. then disassemble rear shied metal parts from chassis.
3.put rear shied in box.
Attention:1.Do not touch the electrical components & ODD eject cable & inverter cable.
4
Use electric screwdriver vertically download three
screws on FOOT L,put screw into material
box.Notice:Don't mix the screw
2
5
Put two foots in material box.
3
Use electric screwdriver vertically download three
screws on FOOT R,put screw into material
box.Notice:Don't mix the screw
6
pull out the AMP audio cable from the M/B corresponding
connect.
7