HP TouchSmart IQ810 Series Product End-Of-Life Disassembly Instructions page 22

1
Take bottom frame from LCD frame.
4
Disassemble 1 screw on Hot Start vertically(as pic),put screw in screw box.
2
camera protective glass(down)&camera
cushion(up)
dust-proof
Take 2 pcs MIC dust-proof&1PCS camera protective glass&1PCS
camera cushion(as pic).Note:Don't scratch camera glass.
2.Put them in material temporary storage.
3
3
dust-proof
Take off camera protective glass to material box.
5
卡勾
1.Take Hot Start module from LCD bottom frame,pull out
Hot start cable.Note:Don't damage cable.
2.Put Hot Start module &cable separately in material
temporary storage.