HP TouchSmart IQ810 Series Product End-Of-Life Disassembly Instructions page 16

1
Disassemble 6 screw on M/B vertically,put them in screw
box.
4
1.Dissamble 4screws on left/right speaker vertically.
2
As pic,take MB from BASE PAN and put it in material
temporary storage.
Note:Don't touch component.
5
Pull out speaker cable from AMP connector vertically.
2.Take left/right speaker,check speaker no broken ,no
deformed.
3
Tear heat sink pad from base pan.
6
Disassemble 3 screw on AMP card vertically (as pic)Put them in screw
box