Download Print this page

Connection Settings - Extron electronics NAV SD 511 Setup Manual

Hide thumbs Also See for NAV SD 511:

Advertisement

NAV SD 511 • Setup Guide (Continued)
NOTE:
Detailed descriptions of communication, configuration, and monitoring are provided in the NAV SD 511 User Guide,
available at www.extron.com.

Connection settings

View and change connection settings as follows:
On the home page, click Settings (see figure 5,
1.
(see figure 6), showing protected views of the network connection settings.
Editing of connection settings is disabled when the
NOTE:
device is assigned to an Extron NAVigator System Manager.
To change the settings, click Edit (see figure 6,
2.
changes to Save.
Click in the desired field (
3.
Repeat step 3 as necessary for other values.
4.
Click Save.
5.
Pairing devices via front panel
Pair devices as follows:
Use a Tweeker or other small screwdriver to press
1.
and hold the encoder front panel ID button for
approximately 3 seconds, until the ID LED blinks. The
encoder enters pairing mode, which allows decoders to
receive the AV and USB streams from encoders.
One at a time, use a Tweeker or other small screwdriver
2.
to press and hold the decoder front panel ID button for approximately 3
seconds, until the ID LED blinks three times. The decoder is now paired
to the encoder.
Repeat step 2 for each decoder.
3.
Use a Tweeker or other small screwdriver to press and release the
4.
encoder front panel ID button. The encoder exits pairing mode.
Repeat steps 1 through 4 to pair decoders to other encoders.
5.
After all devices are connected, powered on, and paired, the system is fully operational.
Operation in a System with a NAVigator
The Extron NAVigator is a system manager that easily configures and controls the NAV System. The NAVigator supports 16 endpoints by
default, but a LinkLicense can upgrade its capabilities to support up to 240 endpoints.
See the NAVigator User Guide, available at
) and then Network Connection (
1
1
). The Edit button
2
) and edit it as necessary.
www.extron.com
ID
AV
AV
A V
A
A
AV SD 511
V
V
Figure 6.
for details.
). The Network Connection pane opens
2
2 2 2 2
2 2 2 2 2 2 2 2
2 2 2 2 2 2
1 1 1 1
1 1 1 1 1 1 1 1
1 1 1 1 1 1
Network Connection Pane
5

Advertisement

loading