Table of Contents
Advertisement
D Note
• The secondary audio will not be output
when the secondary video is not displayed
or when "BD Audio Mode" is set to "HD
Audio Output". (For some Blu-ray™ discs,
secondary audio will be output even when
secondary video is off.)
• The sound mode cannot be changed during
playback of discs not recorded in multiple
audio mode.
• Some discs allow changing the audio
language setting on the disc menu.
(Operation varies depending on the discs.
Refer to the manual accompanying the disc.)
• [AUDIO] may not work on some discs
with multiple audio streams or channels (e.g.
DVDs that allow changing audio setting on
the disc menu).
• If the disc has no audio language, "Not
Available" will be displayed on the TV
screen.
• For discs with DivX
or Dolby Digital audio is displayed. Other
audio will be displayed with "---".
• For DTS-CD (5.1 music disc), selecting
audio streams or channels are not available.
• You can also change the audio setting from
the play menu. Play menu can be called up by
pressing [MODE].
7.13 Switching Camera Angles
Some BD-videos and DVD-videos contain
scenes which have been shot simultaneously
from various angles. You can change the camera
angle when
appears on the TV screen.
1
During playback, press [MODE] to display
the play menu.
2
Use [K / L] to select "Angle", then press
[OK].
• The selected angle will be displayed on
the display bar at the top of the TV
screen.
3
Use [K / L] to select your desired angle.
4
Press [RETURN] to exit.
D Note
• If "Angle Icon" setting is set to "Off",
will not appear on the TV screen.
EN
®
files, only MP3, MP2
7.14 Noise Reduction
Reduces the noise of the playback picture.
1
During playback, press [MODE] to display
the play menu.
2
Use [K / L] to select "Noise Reduction",
then press [OK].
3
Use [K / L] to select your desired setting.
e.g.) Blu-ray Disc™
Noise Reduction
"On":
Activates noise reduction.
"Off":
Deactivates noise reduction.
4
Press [RETURN] to exit.
D Note
• The setting will remain the same even if the
unit is switched to standby mode.
7.15 Virtual Surround
You can enjoy stereophonic virtual space
through your existing 2 channel stereo system.
1
During playback, press [MODE] to display
the play menu.
2
Use [K / L] to select "Virtual Surround",
then press [OK].
3
Use [K / L] to select your desired setting.
e.g.) Blu-ray Disc™
Virtual Surround
"On":
Activates surround effects.
"Off":
Deactivates surround effects.
4
Press [RETURN] to exit.
D Note
• Set the virtual surround setting to "Off" or
lower the volume if the sound is distorted.
• For the virtual surround, audio signal will
always be 2-channel LPCM.
Off
Off
35
Advertisement
Table of Contents
