Playing Back A Usb Flash Drive - FUNAI B4-M500 Owner's Manual

D Note
• For more information, refer to the 3D TV's
manual.
• When "3D Output" is set to "Auto (XX)"
and your TV is not 3D capable, playback of
Blu-ray 3D™ discs will revert to 2D
depending on the disc.
• You can turn off 3D output mode by setting
"3D Output" to "2D". (Refer to page 36.)
• For some Blu-ray 3D™ only discs, playback
in 2D mode is not possible.
• If you cannot watch 3D video properly,
please set "3D Type" to the same type as
your TV's 3D type setting. (Refer to page
36.)
• You can check the current output mode (2D
or 3D) by pressing [DISPLAY] during
playback.
• If you change "3D Output" setting to "2D"
while the unit is in the Resume-On-Stop
mode of Blu-ray 3D™ Disc playback, the
resume information will be cleared.
6.3 Playing Back a USB Flash
Drive
You can play back AVCHD / DivX
WMA / JPEG files in a USB flash drive. With the
USB flash drive, you can also enjoy the following
functions.
- Special additional contents for BD-ROM
Profile 1 ver.1.1. (For more information
about the special additional contents, refer
to the instruction book that came with the
disc.)
- BD-Live™ function (BD-ROM ver. 2 Profile
2.0). (For more information about BD-
Live™, refer to page 32.)
26
1
2
3
4
To Remove the USB Flash Drive
In stop mode, pull it out slowly.
C Caution
• Do not remove the USB flash drive or
• FUNAI cannot be held responsible if your
• If you connect SD cards via a USB card
D Note
• The resume information will be cleared
®
/ MP3 /
• Do not delete the folders or files in the USB
• If a folder or file name includes one of the
• This unit can read AVCHD / DivX
Connect a USB flash drive to the USB input.
Press [HOME].
Use [K / L / s / B] to select "USB", then
press [OK].
Follow steps 2 to 3 in "Playing Back a Disc"
on page 24.
switch the unit to standby mode while the
contents of the USB flash drive are being
accessed. It may result in malfunction or loss
of the drive's data.
USB flash drive is not supported, nor will
FUNAI accept any liability for damage or
loss of stored data.
reader, BD-ROM data will be written onto
the first connected card or device.
when;
- [C (stop)] is pressed while in the
Resume-On-Stop mode.
- the USB flash drive is removed.
- the unit is switched to standby mode.
flash drive with your computer. This unit
may not read USB flash drives formatted on
a computer.
following unrecognisable characters, the
folder or file name may not be displayed
correctly.
- Unrecognisable characters:
. , " = + [ ] ; / \ : | ¥
WMA / JPEG files in an SD card by using a
USB card reader (not supplied).
®
/ MP3 /
EN