Maintenance; Supplied Accessories - FUNAI B4-M500 Owner's Manual

Notice for the Progressive Scan
Output
• Consumers should note that not all high definition
television sets are fully compatible with this product
and may cause artifacts to be displayed in the
picture. In case of picture problems with 480 or
576 progressive scan output, it is recommended
that the user switch the connection to the
'standard definition' output. If there are questions
regarding your TV set compatibility with this 480p
or 576p product, please contact our customer
service centre.
1.2

Maintenance

Cleaning the Unit
Use a soft cloth slightly moistened with a mild
detergent solution. Do not use solutions containing
alcohol, spirits, ammonia or abrasive.
Cleaning Discs
If a disc becomes dirty, clean it with a cleaning cloth.
Wipe the disc from the centre out. Do not wipe in a
circular motion. Do not use solvents such as benzine,
thinner, commercially available cleaners, detergent,
abrasive cleaning agents or antistatic spray intended
for analogue records.
Disc Handling
Handle the discs so that fingerprints and dust do not
adhere to the disc surfaces. Always store the disc in its
protective case when it is not in use.
Servicing
If the unit becomes inoperative, do not try to fix the
problem by yourself. There are no user serviceable
parts inside. Turn the unit off, unplug the AC adapter,
and consult your dealer or an authorised service
centre.
Cleaning the Disc Lens
If the unit does not perform correctly even though
you have referred to "TROUBLESHOOTING" and the
relevant sections in the owner's manual, the laser
optical pickup unit may be dirty. Consult your dealer
or an authorised service centre for inspection and
cleaning of the laser optical pickup unit.
IR Signal Check
If the remote control is not working properly, you can
use a digital camera (including a cellular phone with
built-in camera) to see if it is sending out an infrared
signal.
4
With a digital camera (including built-in cell
phone cameras):
Point a digital camera towards the
remote control. Push any button
on the remote control and look
through the digital camera. If the
infrared light appears through the
camera, the remote control is
working.
1.3

Supplied Accessories

• Remote Control with two R03 batteries
• AC adapter (BP18-120)
• AV cable
• Owner's Manual
• Owner's Manual (CD-ROM)
• Quick Start Guide
• Warranty card
C Caution
• Do not use adapters other than the supplied
AC adapter for this unit.
• Do not use the supplied AC adapter with
any other device.
We are not responsible for any damages or
injury caused by your misuse described
above.
EN