FUNAI B4-M500 Owner's Manual page 48

Problem
Angle does not switch.
Playback does not start when the
title is selected.
The password for rating level has
been forgotten.
Cannot find a JPEG file.
Cannot find an MP3 and WMA
file.
Cannot play back DivX
from a disc.
Error message appears when I
select "Auto" in the "Language".
Cannot play back AVCHD file.
Cannot connect to the network. Check if the network connection is properly made.
Cannot connect to the network
while my PC is connected to the
network.
The capacity of the USB flash
drive decreased.
MPEG-2 video and audio on the
USB flash drive cannot be played
back.
The contents of the USB flash
drive cannot be read.
48
The angle cannot be switched for Blu-ray Disc™ / DVD which do not
contain multiple angles. In some cases multiple angles are only recorded for
specific scenes.
Check the settings in "Parental" menu.
Enter the default password "4737", then your forgotten password will be
cleared.
Make sure that the selected group (folder) does not contain more than
9,999 files for Blu-ray Disc™ / DVD / USB flash drive, and 999 files for CD.
Make sure that the file extension is .jpg, .JPG, .jpeg or .JPEG.
Make sure that the selected folder does not contain more than 9,999 files
for Blu-ray Disc™ / DVD / USB flash drive, and 999 files for CD.
Make sure that the file extension is .mp3 or .MP3 for MP3, and .wma or
.WMA for Windows Media™ Audio.
Make sure that the file extension is .avi, .AVI, .divx or .DIVX.
®
files
Ensure that the DivX
capabilities of this device outlined on page 20.
Make sure that the unit is connected to a fun-Link (HDMI CEC) TV and the
"fun-Link (HDMI CEC)" is set to "On".
This error message may appear when your TV's OSD language is not
supported by this unit.
This unit cannot play back standalone AVCHD files (*.m2ts, *.mts or *.m2t)
written to a DVD or copied to a USB flash drive. The DVD or USB flash
drive containing AVCHD files must have a proper file and folder structure
meeting AVCHD format specifications.
Please use AVCHD compliant device / software to burn or copy AVCHD
files to DVD or USB flash drive. (Please refer to user manuals of the device /
software for more information.)
Turn on the modem or router.
Check the network settings.
Check if the router and/or modem is correctly connected.
Check the BD-Live™ setting in "Manual" setup on page 41.
When connecting directly to a modem via a LAN cable, you might need to
power cycle the modem to reset settings on the modem.
Check the content of your Internet service contract to see if your Internet
Service Provider prevents multiple terminals connecting at the same time.
Data may be written to the USB flash drive when a BD-video that supports
the virtual package is used and a USB flash drive is connected.
MPEG-2 is noncompliant on this unit.
The USB flash drive is not compatible or the contents on the USB flash
drive may be damaged.
Turn off and then turn the unit on again.
Tip
®
video on the disc meets the DivX
®
playback
EN