Table of Contents
Advertisement
9.2
fun-Link (HDMI CEC)
[HOME]
"Settings"
fun-Link (HDMI CEC) allows integrated system
control over HDMI and is part of the HDMI
standard. This function may not work properly
depending on the device connected to the unit.
When "fun-Link (HDMI CEC)" setting is set to
"On" functions listed below will be available.
One Touch Play
fun-Link (HDMI CEC) operations are performed
using remote control buttons. The TV will
automatically be turned on and switched to the
appropriate input source signal.
Buttons for one touch play:
- [B (play)], [H (skip)], [G (skip)],
[the Number buttons], [HOME] or
[DISPLAY]
- [TOP MENU] or
[POP MENU/MENU] (when a disc is
inserted in the unit)
One Touch Standby
When you press and hold
[STANDBY/ON Q] for 2 seconds, it will turn
off the power to the TV first and then turn off
the power to this unit. When the connected
fun-Link (HDMI CEC) compatible display device
is turned off first, this unit will be turned off
subsequently.
System Information
Get & Set Menu Language
The unit recognises the OSD language set on
the TV and automatically sets the same language
as the player menu language (OSD menu
language) for this unit. Refer to the "Language"
on page 37 for available languages.
• This feature is available only when "Auto" is
selected in the "Language" section in the
setup menu.
42
"fun-Link
"HDMI"
(HDMI
CEC)"
9.3
HDMI Video Resolution
[HOME]
"Settings"
Set the resolution of the video signal being
output from the HDMI OUT jack.
You can select the desired "Video Resolution"
among the settings listed below: "Auto","480p/
576p".
Actual Output Resolution:
Setting in the
"Video
480p,
Resolution"
576p
480p/576p
The highest resolution supported
Auto
by your display device will be
automatically in effect.
Composite video output (AV OUT) jack can
only output 480i, 576i.
• For AVCHD and DivX
video in 24 frames per second (1080p/24) is
not available.
D Note
• The selected resolution must also be
supported by your display device.
• If your TV and the unit is connected by a
DVI cable and if you select "Auto", "480p/
576p" will be automatically in effect.
• Refer also to your TV's manual.
• When connected to an HDCP incompatible
display device, the picture will not be
displayed properly.
• The audio signals from the HDMI OUT jack
(including the sampling frequency, the
number of channels and bit length) may be
limited by the connected device.
• Among the display device(s) that support
HDMI, some do not support audio output
(for example, projectors). While connected
to a device such as a projector, audio will
not be output from the HDMI OUT jack.
• When this unit's HDMI OUT jack is
connected to a DVI-D compatible display
device(s) (HDCP compatible) with an
HDMI-DVI converter cable, the signals are
output in digital RGB.
• HDMI video resolution does not work
during the playback of a BD-video.
"Video
"HDMI"
Resolution"
Source
720p
1080i
1080p
480p, 576p
®
, outputting the
EN
Advertisement
Table of Contents
