Yeastar Technology TA410 Installation Manual page 7

No.
Run Indicator
②
LAN Status Indicator
③
WAN Status Indicator
④
FXO Ports Status Indicator
⑤
TA810 back panel
Table 6:
No.
Power inlet
⑥
Reset button
⑦
LAN port
⑧
WAN port
⑨
RJ11 FXO Ports
⑩
Feature
Feature
For connection to power supply.
Press and hold for 7 seconds to reset to factory
defaults.
For connection to Local Area Network (LAN).
Reserved.
For connection to Public Telephone Network
(PSTN).
TA410/810 Installation Guide | 3 - Hardware Overview | 7
Description
Indicates the system status.
• Blinking: The system is working properly.
• Not Blinking/Off: The system goes wrong.
Indicates the LAN status.
Reserved.
Indicates the FXO ports status.
• Solid red: Public Telephone Network (PSTN)
is connected to the port.
• Red light blinking: No Public Telephone
Network (PSTN) is connected to the port.
Note: The FXO indicators 5-8 are
invalid.
Description
Note: Do NOT press this button for a
long time, or the system would break down.