Setting The Alarm - Electrohome EAAC200 Quick Start Manual

Setting the Alarm

1. Before you start:
a. Get familiar with the buttons (
the Top View. And the 4 regions ( --- )
of the display on the Front View.
b. Make sure the radio is off. If the radio is
on, press the
off.
2. Enter the setting mode:
a. Long-press the
alarm time (region
display (Setting Mode) to start setting
the alarm clock #1.
-- ) on
button ( ) to turn it
button ( ) until the
) flashes on the
Note: If the time stops flashing before
you finish the following steps, long-press
the button (
3. Set the alarm time:
a. Make sure the alarm time (region
flashing during the following steps. If it is
not, follow step 2 above.
b. Press the
hour.
Note: The time is in 12-hour format. If a
green dot displays in the region , it
means the alarm time is in PM.
c. Press the
minute.
) again until it flashes.
button ( ) to increase the
button ( ) to increase the
) is
3