Setting Alarm 1 & Alarm 2 - Electrohome CR35 User Manual

OPERATING INSTRUCTIONS
1. Press the button to DECREASE numbers or to
toggle through settings.
2. Press the button to INCREASE numbers or to
toggle through the different settings.
3. Press the button after each setting to confirm your
selection and move on to the next setting.
PM appears on the LED screen when time is set to PM; blank for AM.
Pressing the or the buttons once, decreases/increases one number at a time.
Pressing and holding the / buttons quickly decreases/increases the numbers.
SETTING ALARM 1 & ALARM 2
To set ALARM 1, press the button once to view current alarm setting then press and hold the
button and alarm time will flash. The settings below will appear in the following order:
When "bu" (buzzer) is selected
AL 1 Hour > AL 1 Min > AL 1 Alarm Modes >bu (buzzer) > L10 (Wake-up light)
When AM or FM radio is selected
AL 1 Hour > AL 1 Min > AL 1 Alarm Modes >AL 1 Radio Station > AL 1 Radio Volume > L10
light brightness)
1. Press the / buttons to decrease/increase the HOUR; press the
HOUR. The MINUTES will begin to flash.
2. Press the / buttons to decrease/increase the MINUTES; press the
MINUTES. ALARM MODES will flash.
or
ou
(Wake-up
button to confirm
button to confirm
- 14 -
OPERATING INSTRUCTIONS
ALARM MODES allows you to set more than one alarm in a week i.e. ALARM 1 set to wake you Monday-
Friday and ALARM 2 set to wake you on weekends. The ALARM MODE settings are as follows:
1-5 : Monday to Friday
1-7 : Whole week
When selecting 1-1, you must select a specific day as follows: 1=Monday, 2=Tuesday,
3=Wednesday, 4=Thursday, 5=Friday, 6=Saturday, 7=Sunday
3. Press the / buttons to toggle between the ALARM MODE settings then press the
button to confirm your selection; if 1-1 is selected, press the
between the days of the week and press the
options will begin to flash.
4. Press the / buttons to toggle between the Wake options FM, AM or bu (buzzer); press
the button to confirm your selection. If AM or FM is selected, the Alarm Volume selection
will begin to flash.
5. Press the / buttons to decrease/increase the Alarm Volume; press the
confirm your selection. The Wake-up light brightness options will begin to flash.
6. Press the / buttons to decrease/increase the Wake-up light brightness; press the
button to confirm your selection.
7. To deactivate ALARM 1 press and hold the
on the front LED panel.
To set ALARM 2, press the button once to view current alarm setting then press and hold the
button and alarm time will flash. The settings below will appear in the following order:
When "bu" (buzzer) is selected
AL 2 Hour > AL 2 Min > AL 2 Alarm Modes >bu (buzzer) > L10
6-7 : Saturday & Sunday
1-1 : One day of week
/
buttons to toggle
button to confirm your selection. The Wake
button to
button until the AL 1 symbol is no longer visible
(Wake-up light brightness)
- 15 -