Page 1
V1.07 USB Charging Alarm Clock Radio With Projection Thank you for your purchase of this Electrohome product. Please read this instruction manual carefully before using product to ensure proper use. Keep this manual in a safe place for future reference.
NEED HELP? DO NOT RETURN THIS PRODUCT TO THE STORE Please contact an ELECTROHOME® customer support representative first regarding any additional information on product features, specifications or assistance with setup. Please contact us via one of the methods below: Support: www.electrohome.com/support...
WARNINGS WARNING To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. CAUTION Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION - TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR...
IMPORTANT SAFETY INFORMATION Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 10.
IMPORTANT SAFETY INFORMATION 26. Unwind and straighten the power cord before use. 27. Damage Requiring Service Unplug the power cord and refer servicing to qualified service professional under the following conditions: A. If liquid has been spilled on or into the product. If the product has been exposed to rain, water, or other liquids.
Page 6
IMPORTANT SAFETY INFORMATION Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Snooze Function ..................17 Sleep Timer ....................17 Adjusting LED Brightness ................18 Listening to the Radio .................18 To Set / Recall the Radio Presets ..............18 USB Charging Function ................19 Troubleshooting ......................20 Care and Maintenance ....................20 Specifications ........................21 Electrohome Warranty ....................22 - 7 -...
WHAT’S INCLUDED • USB Charging Alarm Clock Radio • Instructional Manual • Quick Start Guide • 1 x 3V, CR2032 Flat Lithium battery • Power Adapter PRODUCT INFORMATION FRONT - LED SCREEN LED dot appears, indicating AM Band is selected LED dot appears, indicating FM Band is selected Alarm 1 - LED dot appears, when Alarm 1 is set Displays the hour...
Page 9
PRODUCT INFORMATION FRONT BUTTONS Increases Volume Turns Power ON/OFF /AM/FM Band Selector AM/FM Decreases Volume REAR PANEL Power Input Charges USB devices PROJECTOR Projection Focus Projection Flip/Temperature Projection ON/OFF - 9 -...
Page 10
PRODUCT INFORMATION TOP BUTTONS SNOOZE/SLEEP DIMMER PRESETS Set Radio Presets Set ALARM 1 Set ALARM 2 SNOOZE / SLEEP / LED BRIGHTNESS / TIME ZONE Set TIME / Y-M-D / 24h-12h Clock ; View Temperature View D-M-Y / Tune-Scan Radio (BACK) Set DST / Tune-Scan Radio (FORWARD) / Select °C OR °F - 10 -...
Page 11
PRODUCT INFORMATION BOTTOM Battery compartment for 1 x 3V, CR2032 Flat Lithium battery FM Antenna Indoor Temperature Sensor - 11 -...
OPERATING INSTRUCTIONS CONNECTING POWER The USB Charging Alarm Clock Radio is equipped with an "AUTO TIME SET" feature. When power is connected, the clock display will flash '2' which is TIME ZONE 2 (Eastern time) and the default TIME ZONE setting. The correct time will be displayed, unless you are in another time zone.
OPERATING INSTRUCTIONS INSTALLING THE BATTERY Using a small Phillips Head screwdriver, remove the screw from the battery panel on the bottom of the unit. Remove the battery compartment panel. Remove/properly dispose of depleted battery and replace with new, 3V, CR2032 Flat Lithium battery.
OPERATING INSTRUCTIONS DST/°C °F button for 3 To REACTIVATE DST/Summer Time, press and hold the seconds while the radio is OFF. 'ON' will appear in the display to show that the Automatic DST/Summer Time adjustment is reactivated. The display will return to the clock. •...
OPERATING INSTRUCTIONS SETTING ALARM 1 & ALARM 2 To set ALARM 1, press and hold the button and alarm time will flash. The settings below will appear in the following order: AL 1 Hour > AL 1 Min > AL 1 Alarm Modes > AL 1 Wake Options > AL 1 Radio Volume Press the buttons to decrease/increase the HOUR;...
Page 16
OPERATING INSTRUCTIONS SETTING ALARM 2 To set ALARM 2, press and hold the button and alarm time will flash. The settings below will appear in the following order: AL 2 Hour > AL 2 Min > AL 2 Alarm Modes > AL 2 Wake Options > AL 2 Radio Volume Press the buttons to decrease/increase the HOUR;...
OPERATING INSTRUCTIONS ALARM DURATION The BUZZER alarm or RADIO alarm will sound for 30 minutes if no key is pressed, then it will stop automatically and resume to the same alarm time on next scheduled day. To stop ALARM 1 and/or ALARM 2 when sounding, press the button on the front of the unit.
OPERATING INSTRUCTIONS ADJUSTING LED BRIGHTNESS You can adjust the brightness of the LED display making it brighter, dimmer or even turning it OFF when the radio is OFF. There are four dimming options available: HIGH/ MEDIUM/LOW/OFF (Standby). Press the DIMMER button to toggle between the four brightness settings.
OPERATING INSTRUCTIONS USB CHARGING FUNCTION This alarm clock is equipped with a convenient USB charging port on the back panel that allows you to recharge many brands of smartphones, tablets and portable music players. To charge your device, connect the USB charging cable that is connected to your handheld device to the USB charging port on the back panel of this alarm clock.
TROUBLESHOOTING Please consult the Troubleshooting chart below before communicating with ELECTROHOME Customer Support. SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION GENERAL Power does not come on AC cord not plugged in Insert plug firmly into AC outlet RADIO No Sound Power is not on...
SPECIFICATIONS Time Display Size 1.2" Display Type Automatic Time Set Battery Back-up for Time PLL Digital Radio Tuner Radio Station Pre-sets Yes 10 AM / 10 FM Dual Alarm Calendar Display Indoor Temperature Reading Adjustable Brightness Off, Low, Medium, High Sleep Timer Battery Required Lithium, Included (3V CR2032)
If in any situation your purchase displays a manufacturer’s defect during the warranty period and does not function correctly, Electrohome will repair your product and cover all parts, labour, and return costs upon delivery of the Electrohome product together with proof of purchase. Products returned to Electrohome for warranty service must be shipped prepaid (paid by the customer).
Need help?
Do you have a question about the EAAC475 and is the answer not in the manual?
Questions and answers