Time Setting; Alarm Setting - Electrohome iC1088WK User Manual

Current Time
When first powering on your iPhone / iPod Clock/Radio Docking Station, the display will show
"12:00."
To set the time, please perform the following steps:
1. In standby mode, press "MEMO/SET" (2)
2. Press "BACK" or "FORWARD" (9, 11) to select between 12 or 24 hour time format. Press
"MEMO/SET" when complete.
3. Press "BACK" or "FORWARD" to adjust the hour, then "MEMO/SET" to confirm selection.
4. Press "BACK" or "FORWARD" to adjust the minutes, then "MEMO/SET" to complete time
set.
Sleep (Automatic Turn Off)
In Sleep Mode, the audio of the unit will turn off automatically after a specified amount of time.
To set the time interval:
Press "SLEEP" (3) repeatedly to select among 120, 90, 60, 30, 15 minutes.
The iPhone / iPod Clock/Radio Docking Station allows you to set 2 different alarms and can be
used independently or simultaneously.
To set Alarm 1 or Alarm 2:
1. In standby mode, press and hold either "ALM.1/M-" or "ALM.2/M+" (4) for two seconds.
2. Press "BACK" or "FORWARD" (9, 11) to adjust the hour. When complete, press "ALM.1/M-
" or "ALM.2/M+."
3. Press "BACK" or "FORWARD" (9, 11) to adjust the minutes. When complete, press
"ALM.1/M-" or "ALM.2/M+."
Wake Up Mode
After setting the alarm, press ALM.1/M-" or "ALM.2/M+" repeatedly to select the wake up mode
for Alarm 1 or Alarm 2 (wake up to iPhone / iPod, Radio or Buzzer).
To wake up to buzzer:
1. Press the ALM.1/M-" or "ALM.2/M+" button.
2. A small "alarm clock logo" will be displayed on LCD.
To wake up to iPhone / iPod:
1. Press the ALM.1/M-" or "ALM.2/M+" button.
2. A small "iPhone" logo will be displayed on LCD.
3. Follow the procedure in "Play Your iPhone / iPod" section of this manual.
To wake up to the radio:
1. Press the ALM.1/M-" or "ALM.2/M+" button.
2. A small "music note" logo will be displayed on LCD.
3. Follow the procedure in the "Radio" section of this manual.
Turning off Alarm
When the alarm is ringing, press "SNOOZE/DIMMER" (5) to delay the alarm for 9 minutes.
Press "ALM.1/M-" or "ALM2./M+" to shut off designated alarm for 24 hours. Press and hold
either alarm button to disable alarm altogether.

Time Setting

Alarm Setting

- 5 -