Setting Alarm 1 & Alarm 2 - Electrohome EAAC475 User Manual

SETTING ALARM 1 & ALARM 2
To set ALARM 1, press and hold the
below will appear in the following order:
AL 1 Hour > AL 1 Min > AL 1 Alarm Modes > AL 1 Wake Options > AL 1 Radio Volume
1. Press the
button to confirm HOUR. The MINUTES will begin to flash.
2. Press the
button to confirm MINUTES. ALARM MODES will flash.
ALARM MODES allows you to set more than one alarm in a week i.e. ALARM 1 set to
wake you Monday-Friday and ALARM 2 set to wake you on weekends. The ALARM MODE
settings are as follows:
1-5 : Monday to Friday
1-7 : Whole week
6-7 : Saturday & Sunday
1 : Monday
2 : Tuesday
3. Press the
the button to confirm your selection. The WAKE OPTIONS will begin to flash.
4. Press the
BELL; press the
Radio Volume selection will begin to flash.
5. Press the
button to confirm your selection, and complete the alarm set up.
6. Alarm will be armed once alarm setup is completed.
OPERATING INSTRUCTIONS
/ buttons to decrease/increase the HOUR; press the
/ buttons to decrease/increase the MINUTES; press the
/ buttons to toggle between the ALARM MODE settings then press
/ buttons to toggle between the WAKE OPTIONS AM, FM or
button to confirm your selection. If AM or FM is selected the
/ buttons to decrease/increase the Radio Volume; press the
button and alarm time will flash. The settings
3: Wednesday
4: Thursday
5: Friday
6: Saturday
7: Sunday
- 15 -