Setting Alarm 1 & Alarm 2 - Electrohome CR35W User Manual

1. Press the button to DECREASE numbers or to
toggle through settings.
2. Press the button to INCREASE numbers or to
toggle through the different settings.
3. Press the button after each setting to confirm your
selection and move on to the next setting.
PM appears on the LED screen when time is set to PM; blank for AM.
Pressing the
or the
Pressing and holding the
SETTING ALARM 1 & ALARM 2
To set ALARM 1, press the
button and alarm time will flash. The settings below will appear in the following order:
When "bu" (buzzer) is selected
AL 1 Hour > AL 1 Min > AL 1 Alarm Modes >bu (buzzer) > L10 (Wake-up light)
When AM or FM radio is selected
AL 1 Hour > AL 1 Min > AL 1 Alarm Modes >AL 1 Radio Station > AL 1 Radio Volume > L10 (Wake-up
light brightness)
/
1. Press the
HOUR. The MINUTES will begin to flash.
2. Press the /
MINUTES. ALARM MODES will flash.
Selecting L00 for gradual light brightness will prevent the light from turning on
prior to alarm.
OPERATING INSTRUCTIONS
buttons once, decreases/increases one number at a time.
/ buttons quickly decreases/increases the numbers.
button once to view current alarm setting then press and hold the
buttons to decrease/increase the HOUR; press the
buttons to decrease/increase the MINUTES; press the
- 16 -
or
ou
button to confirm
button to confirm