Table of Contents
Advertisement
Combo — Manual
2.2
Connections
Figure 6 illustrates all connections at the back side of the instrument.
Figure 6: Back view of the instrument with connections.
2.2.1
Static Pressure - Pst
Indu Combo must be connected to the static pressure source. Static
pressure source is usually obtained from pressure sources located on
the fuselage side surfaces or from the static port on the pitot tube.
(a) 57 mm
(b) 80 mm
12
2.2 Connections
©
Kanardia 2015-2018
Advertisement
Table of Contents
