Introduction; General Description - Kanardia INDU COMBO Manual

Combo — Manual
1

Introduction

First of all, we would like to thank you for purchasing our device.
Indu Combo is an electronic device, which mimics classical construc-
tion and combines it with the state of the art electronics. This results
in the best of both worlds; a perfect and intuitive analogue reading
combined with high precision of modern electronics.
This manual describes the technical description of the unit, installa-
tion and operation.
CAUTION: Indu Combo is not TSO approved as a flight
1.1

General Description

Combo is an electromechanical device. It consists of high precision
electronic differential pressure sensor and altitude pressure sensor,
which provide dynamic and static air pressures in digital form. The
electronics reads the sensor and drives stepper motor turning a nee-
dle, which shows airspeed an a scale.The scale has markings specific
to an aircraft.
also shown on a colour LCD display. When connected to a CAN bus
Combo outputs airspeed, altitude, static pressure, QNH and stan-
dard altitude data which can be used by other Kanardia devices.
The QNH (baro-correction) units can be changed. You can choose
between:
ˆ hPa in the range of (590 – 1080) with one hPa step.
ˆ inHg in the range of (17.42 – 31.89) with 0.01 inHg step.
1
Markings must be specified at the time of order.
1
Altitude, rate of climb and QNH informations are
instrument.
5
1. Introduction
©
Kanardia 2015-2018