Water Connections To Heat Pump - Aquacal WATER SOURCE WS03 Installation Manual

SunPower Heat Pump Configuration
1.4.d Water Connections to Heat Pump
Heat Pump union sizes are specified on diagrams.
l
Connections to site plumbing are made via PVC solvent cement to the female slip socket of the plumbing unions.
l
High-pressure units use joint compound on threaded copper connections.
l
Plumbing unions are available from AquaCal
l
NOTICE
Do not use glue on the threaded portion of the equipment's unions. A glued-in-place union will prevent the
l
equipment from being properly winterized.
Water Source WS10 (Titanium or Cupronickel Exchanger)
Page - 12
®
.
Failure to heed the following may result in damage to equipment.