Water Connections To Heat Pump - Aquacal Heatwave Superquiet TropiCal Installation Manual

Heat Pump with Gas Heater backup
Multiple Air Source Heat Pumps
1.3.c Water Connections to Heat Pump
Heat Pump union sizes are specified on diagrams.
l
Connections to site plumbing are made via PVC solvent cement to the female slip socket of the plumbing unions.
l
Plumbing unions are available from AquaCal
l
NOTICE
Do not use glue on the threaded portion of the equipment's unions. A glued-in-place union will prevent the
l
equipment from being properly winterized.
Page - 7
®
Failure to heed the following may result in damage to equipment.
.