Polishing
1. Polish the heat pump's cabinet panels using an approved polishing agent and following the manufacturer's
instructions. Do not use chemicals on the display panel.
2. Rinse the heat pump panels with fresh water, wipe, and buff panels using a dry soft cloth.
3. Allow heat pump interior and surrounding equipment to "air-dry" for several hours prior to restoring electrical
power.
APPROVED POLISHING AGENTS
®
Simoniz
Wax
®
Glo-Coat
Armor All
®
Protectant
Table 5 - Polishing Agents
•
The trademarks used in approved polishing agents are the property of their owners and are not related to
®
AquaCal
.
•
Page - 61