Table Of Contents - Aquacal WATER SOURCE WS03 Installation Manual

Contacting AquaCal AutoPilot, Inc.
Safety Instructions
1 - Installation
1.1 Positioning Equipment
1.2 Clearances
1.3 Dimensions
1.4 Plumbing
1.4.a Plumbing Requirements
1.4.b Plumbing Diagrams (Water Source)
1.4.c Plumbing Diagrams (SunPower)
1.4.d Water Connections to Heat Pump
1.4.e In-Line Chlorine Feeders
1.4.f Water Flow Rates
1.4.g Adjusting Water Flow Using ΔT (Delta-T)
1.4.h Geothermal Menus
1.4.i Maintaining Ability to Winterize
1.5 Electrical
1.5.a Electrical Requirements
1.5.b Incoming Power Access Holes
1.5.c Access Panels
1.5.d Verifying Transformer Setting
1.5.e Three-Phase Adjustment
1.5.f Schematic Location
1.6 External Equipment
1.6.a Connecting a Call Flex
1.6.b Connecting a Source Water Relay Switch
1.6.c Connecting External Controllers to Heat Pump
c.1 Connecting Smart Bus Controllers
c.2 Connecting Two-wire Controllers (with internal thermostat)
1.6.d Connecting Gas Backup Heater to Heat Pump
1.6.e Connecting Multiple Heat Pumps (Primary / Secondary)
1.6.f Connecting a Pool/Spa Switching Relay
1.7 Program Heat Pump for the Customer
1.7.a Setting Date and Time
1.7.b Setting Time and Date Format
1.7.c Selecting Celsius or Fahrenheit
1.7.d Setting Entry Code Option
1.7.e Using Entry Code to Access Heat Pump
1.7.f Resetting Factory Defaults
1.8 Cleaning Equipment After Installation
2 - Troubleshooting
2.1 Fault Codes
2.2 Issues and Resolutions
3 - Appendix
3.1 Factory Defaults
3.2 Identifying Model Specifications

Table of Contents

i
1
1
3
4
4
6
7
7
8
11
12
14
14
15
17
18
19
19
22
23
23
25
25
26
26
29
29
30
33
36
41
47
50
50
51
55
56
58
58
60
62
63
67
73
73
74