Cleaning Modes; Using The Multiflex® Wand; Multiflex Storage - Shark Vertex IZ440 Series Owner's Manual

CLEANING MODES

UPRIGHT MODE
To clean floors, place foot on floor nozzle and tilt handheld vacuum back.
NOTE: Brushrolls will only engage when the handheld vacuum is tilted back.
ABOVE-FLOOR HANDHELD
Press the wand release button and lift the handheld
vacuum off the wand. Attach an accessory for
great cleaning on stairs, furniture, and other
above-floor areas.
NOTE: All accessories are compatible with both the wand and the handheld vacuum.
s h a r kc l e a n . c o m
ABOVE-FLOOR WITH WAND
Stand the vacuum upright and press the nozzle
release button located at the bottom of the wand,
above the nozzle. Lift wand to detach.
Great for cleaning baseboards, ceiling fans, window
sills, and other hard-to-access areas.
USING THE MULTIFLEX® WAND
Press the unlock latch on the back of the wand,
then adjust the angle.

MULTIFLEX STORAGE

To put the vacuum in storage mode, press the
unlock latch while folding the handheld vacuum
forward.
Adjust the wand to a lower angle to easily clean
under furniture.
(Click)
To take the vacuum out of storage mode, press the
unlock latch and lift up the handheld vacuum until
the wand clicks and locks into place.
sharkclean.com