Service and Repairs
Reel Drive Belt
g258535
1.
Reel drive box assembly
2.
Reel belt
3.
Idler arm
Removing the Reel Drive Belt
Greensmaster
®
e1021/e1026
20246SL Rev A
4.
Bolt
5.
Gasket
6.
Reel drive cover
The greensmaster machines use a positive drive belt on the right side of the
machine to operate the cutting unit.
Note: Refer to
Figure 13
1. Park the machine on a level surface. Disconnect the battery pack; refer to
Connecting the Lithium Battery Pack (page
2. Remove the 3 socket head screws (7) that secures the reel drive cover (6)
to reel drive assembly (1) and remove the reel drive cover to expose the
reel drive belt (2).
Figure 13
during this procedure.
Page 4–5
Traction and Reel Drive Systems: Service and Repairs
7.
Socket head screw (3 each)
5–3).