Testing the Fuse
Greensmaster
®
e1021/e1026
20246SL Rev A
1. Access the fuse block as described above.
2. Carefully remove the fuse from the fuse block for testing.
3. The fuse should have continuity between the fuse terminals.
The e1021/e1026 machine uses special fuses that are rated for 80
V. If the fuse replacement is necessary, ensure to use the fuses as
identified in your e1021/e1026 Parts Catalog. Do not use regular
automotive fuses in your e1021/e1026 machine.
4. Carefully install the functional fuse into the fuse holder.
5. After you complete the fuse service, secure the battery cover to the machine
with the 4 bolts.
6. Connect the battery pack; refer to
(page
5–3).
IMPORTANT
Connecting the Lithium Battery Pack
Page 5–23
Electrical System: Testing the Electrical Components