Adjustments; Adjusting The Reel Drive Belt - Toro Greensmaster e1021 Service Manual

Adjustments

Adjusting the Reel Drive Belt

g258535
1. Reel drive box assembly
2. Reel belt
3. Idler arm
Greensmaster ® e1021/e1026
20246SL Rev A
4. Bolt
5. Gasket
6. Reel drive cover
1. Park the machine on a level surface. Disconnect the battery pack; refer to
Connecting the Lithium Battery Pack (page
2. Remove the 3 socket head screws (7) that secures the reel drive cover (6)
to the reel drive assembly (1) and remove the reel drive cover to expose
the reel drive belt (2).
3. Check tension by depressing the belt (item 2 in
between pulleys with 18 to 22 N (4 to 5 lbs) of force. The belt should deflect
6.35 mm (0.25 inch). If deflection is incorrect, proceed to next step. If
deflection is correct, continue operation.
Figure 12
Page 4–3 Traction and Reel Drive Systems: Adjustments
7. Socket head screw (3 each)
5–3).
Figure 12) at mid span