Assembling the Brake Latch Shaft
Controls, Wheels and Accessories : Service and Repairs
1. Slide and position the torsion spring (10) onto the brake latch shaft (9).
2. Slide and position the brake latch shaft (9) into the upper receiver weldment
(12).
3. Slide and position the brake lock lever (4) onto the brake latch shaft (9).
Secure the brake lock lever with the roll pin (5).
4. Install the control covers to the handle assembly with bolts and washers.
5. Connect the battery pack; refer to
(page
5–3).
Connecting the Lithium Battery Pack
Page 6–12
Greensmaster
®
e1021/e1026
20246SL Rev A