Dual Screen Layouts; Using Web User Interface; Configuring The Web Server Type - Yealink MeetingBar A20 Deployment Manual

Dual Screen Layouts

The following introduces the default layout when you connect two displays.
On one display, the remote video and the PC content is displayed in PiP mode with the remote video in
full screen and the PC content in a small window. On the other display, the PC content is displayed in full
screen.

Using Web User Interface

MeetingBar A20 and CTP18 allow the administrator to access the web user interface, including configuring
the network settings, upgrading firmware, and export the log, and so on.
•

Configuring the Web Server Type

• Logging into the Web User Interface
Configuring the Web Server Type
The web server type determines the protocol used for accessing the web user interface of the endpoint/
touch panel. Both HTTP and HTTPS are available. It defaults to HTTPS. The HTTPS ensures that
the configuration of all login information (such as user names and passwords) is transmitted using an
encrypted channel. If you disable the desired protocol, you cannot access the web user interface via this
protocol.
Procedure
1. On the idle screen, tap Settings > General > System Settings > Network.
2. Enter the administrator password (default: 0000) and tap Enter.
| System Settings | 31