Process Order Routing; Presets - Solid State Logic SSL UC1 User Manual

Product Overview & Features
10 - 360° Button
Opens/minimises the SSL 360° software on your computer screen.
11 - Zoom Button
Toggles the Zoom mode of the Plug-in Mixer.

Process Order Routing

You can adjust the process order routing for the selected
Channel Strip 2 plug-in by pressing the ROUTING key
and then turning the secondary encoder.
There are 10 possible routing orders, as shown in the
table below. Each routing order has a 'b' equivalent,
which sources the Dynamics sidechain externally.
Processing Order Options
1. Filters > EQ > Dynamics (Default)
2. EQ > Filters > Dynamics
Press ROUTING then use the secondary encoder to select the
3. Dynamics > EQ > Filters
process ordering for the selected Channel Strip 2 plug-in
4. Filters > Dynamics > EQ
5. Filters > Dynamics > EQ (with Filters to DYN S/C)
6. Filters > EQ > Dynamics (with EQ to DYN S/C)
7. Filters > EQ > Dynamics (with Filters to DYN S/C)
8. EQ > Filters > Dynamics (with EQ and Filters to DYN S/C)
9. EQ > Filters > Dynamics (with EQ to DYN S/C)
'b' equivalent - the top line going into Dynamics means
10. EQ > Dynamics > Filters (with DYN and Filters to DYN S/C)
that the Dynamics sidechain is set to EXTERNAL
To return the secondary encoder to controlling the selected Bus Compressor, simply press the ROUTING key again.

Presets

You can load presets for the selected Channel Strip 2 or Bus Compressor 2 plug-in directly from the surface by pressing the PRESETS
key. Turn the secondary encoder to choose if you want to load a preset for the selected Channel Strip or Bus Compressor and confirm
by either pushing the secondary encoder, or pressing the CONFIRM button. Then use the secondary encoder to scroll through the list
of presets. Pushing will either confirm the current preset (it turns green), or it will enter you into a preset folder. Use the BACK ARROW
key to navigate back up through preset folders. Press PRESETS once more to return the secondary encoder to controlling Bus
Press the PRESETS key and then choose Channel Strip Navigate through your presets list using the
or Bus Compressor secondary encoder and push to load
SSL UC1 User Guide
18