Adjusting The V-Drive Module Height - Vermeiren V-Drive User Manual

EN
NL

3.6 Adjusting the V-drive module height

The height of the V-drive module can be adjusted
over a range of 8 cm (5 steps):
1. Remove the V-drive module from the
wheelchair as described in §3.2 .
2. Remove the bolt-nut connection (15).
3. Slide the telescopic tube support (16)
up/down over the attachment block to the
desired height.
4. Replace and firmly tighten the bolt-nut
connection (15).
5. Reattach the V-drive module to the
wheelchair according to §3.1.3 .
15
10
2021-05
Using V-drive
16
V-drive